This cable is:
- Suitable for petrol engines up to 2500 cc
- Suitable for diesel engines up to 2000 cc
The Tech Spec:
Battery Lead Amperage: 110 amps
Cable Cross Section: 16.0 mm²
AWG number: 5
Conductor Construction: 206/0.30 Ømm
Resistance per metre at 20°c: 0.00126 Ω/km
Diameter including insulation: 8.3 Ømm
Terminals:
Tin-plated brass
What's in the box: (assembled)
1 x 16mm² 110 amp battery cable
1 x Ring terminal
1 x Straight End battery terminal
All terminals are Crimped, Soldered & Heat shrink applied (straight end battery terminals are not hex crimped- soldered only)
Please Note:
Lengths are for the length of cable excluding terminals & Inline fuses.
Each Ring Terminal increases the length of the cable by approximately 2cm.
Each Straight End Terminal increases the length of the cable by approximately 3cm.
Each Inline Fuse Holder increases the length of the cable by approximately 7cm.
'Black Positive' is offered as an option as some customers prefer to use black cable throughout for both negative and positive cable runs. If you choose 'Black Positive', we will put red heat shrink on the ends of the cable and fit Positive battery terminals as required.
We offer a choice of Standard Hi-Flexible copper cable or Tinned Hi-Flexible copper cable.
Tinned cable is for use in harsher environments.